How To Glue Particle Board

How To Glue Particle Board – A Complete Guide

Particle board is one kind of process wood. So, you must determine which type of adhesive should be most suitable for them. As a board, the screws or nails cannot give you the maximum joining.

Then the question arise what is the best for joining particle board?

Glue is the best way to bond particle board. If you think in terms of longevity and aesthetics of the joining, then there is no alternative to join them with the best particle glue.

Important thing is to know how to glue particle board properly. The maximum longevity of the joining depends on the application of the glue.

That’s why we have designed the article to let you know the step by step guide of joining particle board with glue.

Procedures of How To Glue Particle Board

The right approach to joining the particle board will make sure a better bonding. That’s why you should follow these steps to get a durable joining whether you are a DIYer or professional. Let’s get them.

Get the Right Glue

Majority percent of the working success depends on choosing the right glue. There is a lot of glues out there, but which would be best for particle board?

So, before diving into the work, you must pick the right glue. Some types of glue are the following:

  • Polyurethane glue is a waterproof glue. Use this glue for outside joining or where chances are higher to contact with water.
  • Hide glue is especially for furniture repairing. It has a long open time up to 30 minutes.
  • Epoxy glue is used for getting the strength and filling the gaps. It is also waterproof glue.

Assemble the Materials

Before you start working, you must put all materials together. To avoid working hassle and get a better bonding, just assemble the necessary stuff beforehand. These are including:

  • Particle Glue
  • Cleaning Cloth
  • Application Brush
  • Sandpaper
  • Clamps
  • Wax Paper
  • Masking Tape

Sanding the Surface

Before going to the application, you should check whether the board need sanding or not. If needed, then sand it thoroughly and clean the dust.

Apply the Glue

After cleaning the surfaces, now you have to apply the glue on the particle boards. Spread the glue with a glue-stick if they joint is longer. There are some applicators which are the following:

  • Brush can be used to spread the glue evenly. The flux brush can ensure even spreading and prevent wasting the glue.
  • Notched Trowel is another glue applicator. Basically, it is used after applying the glue so that the glue can mix in the surfaces and penetrate deeply.

Rub the Joint

After applying the glue and before clamping, you can rub the two joints together. It will help to spread the glue evenly. Plus, a good rubbing of particle board ensures the better penetrating the glue.

Use Wax Paper

Before clamping, you must cover the clamping tools if it is a bar clamp. Otherwise, it will leave a stain or dark spot after clamping. If you use another clamp, then no need to use wax paper.


The longevity of the joining depends mostly on the clamping. So, a proper clamping is important for bonding particle board. You can use any type of clamp for particle board.

Clean the Glue

After a tight clamping, you may notice some glue come out inside the joint. So, using a cloth to clean the surfaces glue immediately. Otherwise, it looks weird if the glue gets dried.

Use a Scrubber

After drying the joint, you can find some hard glue-residue on the surfaces. So, using a scrubber to clear the hard glue.

Filling or Repairing

For small repairing on the particle board, you can use superglue. Besides, for filling on the surfaces use epoxy glue.

Drying Time

Leave the board for complete drying. For the stressed board, it will take a longer time to dry than unstressed particle board. Drying time depends on the type of glue.

Final Words

Whether you are a professional woodworker or a DIYer, you need to identify the best particular glue for particular joining. For small repairing, you need one type of glue, and for longboard joining, you need another glue.

Now the next step is to follow the accurate guideline of how to glue particle board. If you follow these steps and apply an appropriate glue for your particle board, that means you are going to have a better bonding.

Have a Great Bonding.